Lose carton packing machine body

Source:   Date:2014-10-28 15:46:34   Views:

Transmission mechanism is an important means carton packing machine, which directly affects the productivity and performance packing machine, packing machine requires its input boxes institutions, small size, simple structure, easy operation, stable performance and low cost. The carton separation mode, the output carton packing machine body is divided into friction and suction nail types.
First, the friction lose carton agencies
Friction lose carton institutions, small size, low cost, simple structure, easy to operate, has been widely applied in the light packer. However, due to friction lose carton institutions to use the friction surface of the friction wheel and cardboard cartons were separated, therefore, easily soiled sheets and cartons of poor adaptability, easy to clean tissue bad, thick and smooth surface of paper easily separated by surface properties carton (e.g. smoothness, electrostatic properties, etc.) greater impact. Generally applicable to a 150-year-old liner 60 ordinary cardboard boxes.
Friction transmission mechanism mainly consists of paper cartons station, sub boxes institutions and regulatory side of the block components. It works as follows: the sheet of paper stepped code on the table, by the side gear regulations positioning. 1 minute roller rotates continuously rely on the top of the carton with the friction sheet in the form of leaflets will continue to convey to the folding rollers 2, due to the design surface of the folding roller 2 tangential velocity V: greater than the surface separation wheel tangential velocity V ,, so folding roller 2 Once received copies, then high speed folding fence to convey the sheet in order to facilitate the separation of the next round of separation sheets. Paper table with respect to the horizontal position generally have an inclination a ,. Generally in the 15 "to 40 'range, the specific angle depending on the actual design of a given. Paper sets the angle of inclination in favor of a sheet of paper on stage to form a stepped automatic, and produces sheet separator roller direction to decline force to ensure the sheet to facilitate the separation and transport. Side of the block gauge can be adjusted according to the size of the folded sheet format. Separator roller is generally a special rubber wheels.
For the purposes of sub-carton agencies, friction lose carton institutions are mainly of three types:
I. Single-friction wheel transmission carton body.
2. Dual friction wheel transmission carton body.
3. Double sheet pad with anti-friction wheels lose single carton body. Shown (c).
Single-friction wheel transmission carton institutional structures most simple, but prone to the phenomenon of double sheet or blank sheets of paper in the sub-process, especially when performance is poor sheet, double sheet phenomenon will accordingly increase. Dual friction wheel mechanism carrying cardboard carton lose the separation process, the friction wheel four pairs of sheets is first pre-separation, and then were separated by separator roller final cartons, this separation method has played a double sheet and empty Zhang prevention role .
Double sheet pad with anti-friction wheels lose single carton agencies currently use a wide input boxes institution, its main feature is through the separator roller and anti-double-sheet pad with, greatly reducing the phenomenon of double sheet transport . Since the anti-double-sheet pad with special rubber material, which is less than the coefficient of friction of the sheet separator roller for sheet coefficient of friction, but greater than the coefficient of friction between the sheet and the sheet, so that when there is double or more sheets, the anti-double-sheet pad using its friction on the sheet will be extra sheet to stop living, while the uppermost one sheet, due to the sub-roller friction is greater than the anti-double-sheet pad of friction, by sub-roller conveyor to the folding part, this cycle get on. Anti-double-sheet pad 10 is typically a 15mm wide and 20 to 30mm long, its surface made ??of the points corresponding to the radius of curvature of the roller R, in order to further improve its performance.